Publicité
BEFORE INSTALLATION
Before installing the heater, please read the installation instructions and pay attention
to the following:
• Check before installing the electric heater that the maximum amperage of the
main fuse matches the heater parameters.
• Does the heater output (kW) match the volume (ft³ /m³) of the sauna room?
In case there are any uninsulated brick, tile, or glass walls in the sauna room, an
additional 4,8 ft³ must be added to the sauna room volume for each 1 ft² of such
wall; or 1,5 m³ for each 1 m².
The suitable output of the heater can be found in Table 2 and Table 3.
• Are minimal safety distances ensured at the installation site of the heater?
Minimal safety distances between the sauna room's ceiling and walls in view of
installing the electric heater have been provided in Table 1.
ATTENTION!
The manufacturer's warranty is not valid, if the output of the heater
does not correspond to the calculated volume of the sauna room.
INSTALLATION
Positioning of the heater
The heater should be positioned in such a way that there is a safe distance between
flammable materials and external surfaces of the heater.
• Check Table 1 for minimal safety distances between the heater, sauna room's
ceiling and walls.
• Place the heater in such a way that its location does not create dangerous
situations during use and the possibility of accidental contact with the heater
would be minimized.
• Before installing, remove the protective film from the steel plate behind the
heater.
• Keep in mind that the full weight of the heater with stones is 143.3 lb (65 kg) and
ensure that the wall structure is strong enough for it. Attach the frame of the
heater to the wall.
• ATTENTION!
heating element retainer for which installation instructions have been
provided separately.
4
DROP 7 and 9 sauna heater set includes a heat diverter and
Publicité
