Publicité
FRONT BRAKE (DRUM BRAKE)
Adjustment of front brake lever
Free stroke 1 of the brake handle refers to the stroke
between the free position of the brake handle and the
position of the brake handle when it is grasped to make
the front wheel begin to brake.
When adjusting the free stroke 1 of the brake handle, turn
the adjusting nut 2 on the front brake and operate the
front brake handle to make the free stroke 1 10–20mm.
NOTE: If follow the steps, the free stoke is not required,
please have it checked by the authorized dealer.
Wear limit of front brake
There is a wear limit mark on
the front brake of the motorcycle.
Inspect the wear situation of the
front brake following the essentials
below.
1. Inspect whether the braking
system
has
been
properly
adjusted.
2. Operate the braking system and inspect and make
sure the mark extending line 1 is in the allowed range
3 (see the figure) marked on the wear limit mark
Haojue UH115/UH115S 99011H57012H000 V03 (HJ110-7C) 2019-9-12
The mark
extending line is in
the allowed range
41
Haojue UH115/UH115S 99011H57012H000 V03 (HJ110-7C) 2019-9-12
2, otherwise have the component in the front brake
replaced by a qualified distribution and maintenance
organization for safety.
REAR BRAKE (DRUM BRAKE)
Adjustment of rear brake pedal
Free stroke 1 of the rear brake pedal refers to the stroke
between the pedal's free position and the pedal's position
when the pedal is stepped down on to brake the rear
wheel.
When adjusting the free stroke 1 of the rear brake pedal,
turn the adjusting nut 2 on the brake. Turn it clockwise
for a smaller free stroke, or anticlockwise for a larger one.
Make the free stroke 1 20–30mm.
NOTE: If follow the steps, the free stoke is not required,
please have it checked by the authorized dealer.
(43)
EN
(43)
Publicité
