Publicité
STOPPING AND PARKING
1. Twist the throttle grip away from you to close the
throttle completely.
2. Apply the front and rear brakes evenly and at the same
time.
3. Downshift through the gears as road speed
decreases.
4. Select neutral just before the motorcycle stops. The
neutral position can be confirmed by observing the
neutral indicator "N".
5. Park the motorcycle on a firm, flat surface where it will
not fall over.
6. Turn the key to the "%" position.
7. Turn the handlebars all the way to the left and lock the
steering for security.
8. Remove the key.
BWARNING
Hard braking while turning, on wet, loose, rough,
or other slippery surface may cause wheel skid and
loss of control.
Haojue UH115/UH115S 99011H57012H000 V03 (HJ110-7C) 2019-9-12
25
Haojue UH115/UH115S 99011H57012H000 V03 (HJ110-7C) 2019-9-12
BWARNING
Following another vehicle too closely can lead to a
collision. As motorcycle speeds increase, stopping
distance increases progressively.
have a safe stopping distance between you and the
vehicle in front of you.
BWARNING
Inexperienced riders tend to underutilized the front
brake. This can cause excessive stopping distance
and lead to a collision. Using only the front or
rear brake can cause skidding and loss of control.
Thus, the two brakes should be used in a balanced
way at the same time.
BWARNING
If the rider brakes suddenly in turns, the motorcycle
will lose control. The correct method is to brake
before turns to slow down.
BWARNING
Use the braking system carefully and gently on wet
and slippery roads or in turns. Urgent braking on
uneven or slippery roads will cause the motorcycle
to be out of control.
(27)
Be sure you
EN
(27)
Publicité
