Publicité
SETUP ON CONSOLE FOR G29, G920, G923
USING THE LOGITECH G RACING ADAPTER
As the G29, G920 and G923 have no support integrated for a sequential shifter or handbrake the only
way to enable the RS Handbrake & Shifter is by using the Racing Adapter (sold separately)
1
Connect the product into the USB port on the Racing Adapter
2
Connect the 9 pin cable supplied with the Racing Adapter to the shifter port on the underside of your wheel
3
Connect the other end of the 9 pin cable to the appropriate 9 pin connection on the Racing Adapter
NOTE: the Handbrake Axis mode is not supported in this configuration
Once you're connected you will need to reassign the controls in your games as directed in
the Assigning Controls in Games Titles section of this manual As the adapter is connecting
through the 6 speed shifter port on the wheels, the sequential shifter and digital handbrake
functions will emulate the existing gear shift positions, as follows:
Sequential Shift Up: Gear 3
Sequential Shift Down: Gear 4
Digital Handbrake: Gear 6
It is not possible to operate the Driving Force Shifter when using the RS Shifter & Handbrake in this configuration
as the shifter port is not available; nor is it possible to operate more than one
NOTE: some game titles may still not support this configuration if they have no method to reassign the gear
shift functions A list of supported titles can be found on the support site at logitechG com/support/RS-SH
12 ENGLISH
Publicité
