Publicité
Installation
1
A
3
2
1
2
F
Min 0-3/8"
Max 1-3/16"
Fig.4
1. INSTALLING THE HOOD ON THE BOTTOM SHELF OF THE WALL CABINET:
1. Remove pin Y from bracket A. (Pin Y can be discarded.) Then place the insert X
on the slot of the bracket A, as indicated in Fig. 4 - step 3.
Match the C screws with the L washer and attach the A bracket to the cabinet
as indicated in Fig. 4 - step 3.1. Do not completely tighten screws C to allow the
bracket to slide back and forth.
2. Position template B on the wall cabinet, bearing in mind the measurements
indicated in Fig.s 1 and 2 and the minimum distance from the cooktop.
- Mark the references to fasten brackets A to the wall cabinet, as indicated in Fig. 4.
3. Make sure the thickness of the wall cabinet is within the parameters indicated
in Fig. 4 - step 2.
4. Insert the hood into the wall cabinet, ensuring the 2 side springs F are connected
correctly, as the weight of the unit will rest on these springs. Fasten the hood
24" - 36" - 30"
4
2
F
- 15 -
B
M
Publicité
