Publicité
EN
READ THESE INSTRUCTIONS CAREFULLY TO AVOID POSSIBLE INJURY OR PROPERTY DAMAGE!
Important Safety Instructions
CAUTION: To reduce the risk of electrical shock or electrocution
•DO NOT disassemble. DO NOT attempt repairs or modifications. Refer to qualified service agencies for all servicing and
repairs.
•DO NOT use this product in an area where it can fall or be pulled into water or other liquids.
•DO NOT attempt to reuse this product if it has fallen into liquid.
•Use this air compressor with 12 Volt DC systems only.
•This product should never be left unattended during use.
WARNING: To prevent injuries:
•Never allow children to operate this air compressor. Close supervision is necessary when this air compressor is being used
near children.
•This air compressor will become very HOT during and immediately after use. DO NOT touch any part of this air compressor
with bare hands, other than the ON/OFF switch, during and immediately after usage.
•DO NOT use this product near flames or explosive atmospheres or where aerosol products are being used.
•DO NOT operate this product where oxygen is being administered.
•DO NOT pump anything other than atmospheric air.
•NEVER use this product while sleepy or drowsy.
•DO NOT use any tools or attachments without first determining maximum air pressure for that tool or attachment.
•NEVER point any air nozzle or air sprayer toward another person or any part of the body.
•This air compressor is equipped with automatic reset thermal protector and can automatically restart after the thermal
protector resets. Always cut off power source when thermal protector becomes activated.
•Wear safety glasses or goggles when operating this product.
•Use only in well ventilated areas.
Operating Instructions
Please read and follow the operating instructions carefully to assure that you will achieve the best use out of this air
compressor.
IMPORTANT:
1. Always operate the Air Compressor WITHIN THE MAXIMUM PRESSURE RATING of the Air Compressor. Refer to
specification section of this manual.
2. Always OBSERVE THE MAXIMUM DUTY CYCLE of the Air Compressor, Refer to specifications section of this manual for
details. Operations exceeding maximum pressure ratings and or duty cycle will result in damage to Air Compressor.
3. Your air compressor is equipped with automatic thermal overload protector. This feature is designed to protect the air
compressor from overheating causing permanent damage to your air compressor. The thermal overload protector will
automatically cut off power to the air compressor should the internal operating temperature of the air compressor rise
above safe levels during excessive use.
4. Should at any time during usage, your air compressor is automatically shut off, DO NOT attempt to restart the air
compressor. Turn on/off switch of the air compressor to the off position. The automatic thermal overload protector will
automatically reset when the internal temperature of the air compressor drops below safe level. After allowing the air
compressor to cool off or about 15 minutes, you can safely resume usage of the air compressor by turning on the air
compressor.
5. Please note that you may experience a slight delay (about 1 /2 second) of the air compressors motor starting when the
on/off switch is turned on while the air compressor is pressurized (When there is pressure in the line that the compressor is
connected to). This is a normal delayed reaction, not an air compressor on/off switch malfunction.
2
WWW.NIKOLAOUTOOLS.COM
Publicité
