Acoustic Signals - AEG FFB63806PW Notice D'utilisation

Masquer les pouces Voir aussi pour FFB63806PW:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

How to deactivate the rinse
aid empty notification
Make sure the appliance is in user mode.
1. Press
.
• The indicators
are off.
• The indicator
• The display shows the current
setting.
= the rinse aid empty
notification is deactivated.
= the rinse aid empty
notification is activated.
2. Press
to change the setting.
3. Press on/off to confirm the setting.
6.4 The rinse aid level
It is possible to set the released quantity
of rinse aid between level 1 (minimum
quantity) and level 6 (maximum quantity).
Level 0 deactivates the rinse aid
dispenser and no rinse aid is released.
Factory setting: level 4.
How to set the rinse aid level
Make sure the appliance is in user mode.
1. Press
.
• The indicators
are off.
• The indicator
• The display shows the current
setting: e.g.
– The levels of rinse aid range
from 0A to 6A where 0A
means no rinse aid is used.
2. Press
repeatedly to change the
setting.
3. Press on/off to confirm the setting.

6.5 Acoustic signals

Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
,
,
and
still flashes.
,
,
and
still flashes.
= level 4.
completed. By default this acoustic signal
is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
Make sure the appliance is in user mode.
1. Press
.
• The indicators
are off.
• The indicator
• The display shows the current
setting.
= the acoustic signal is
deactivated.
= the acoustic signal is
activated.
2. Press
to change the setting.
3. Press on/off to confirm the setting.
6.6 AirDry
AirDry improves the drying results with
less energy consumption. The appliance
door opens automatically during the
drying phase and remains ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
If, afterwards, the door is
closed for at least 3 minutes,
the running programme
ends.
ENGLISH
13
,
,
and
still flashes.

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Ffb63806pmFfe63806pw

Table des Matières