Publicité
You can change the direction of opening of the door of your freezer by moving the hinges. When
reassembling, make sure the door is well aligned with the body of the freezer and that the seal
adheres correctly.
We remind you that the freezer must be unp lugged when changing the direction of opening of
the door.
Remove screw covers
Unscrew and remove door lifting
upwards
unused opening limiter in bag of spare parts
supplied with appliance.
Unscrew and remove top
Unscrew and remove bottom
hinge.
Screw it on other side in right
position
REVERSING THE DOOR
Unscrew and
remove opening
limiter situated under
door.
Attach new
Unscrew and remove top
hinge.
Screw it on other side in
right position
spare parts provided with appliance.
Put door back in position on the
bottom hinge.
Fix and screw the door into
position with the top hinge.
Replace screw cover.
supplied with appliance to cover holes.
Screw handle back on other side and
replace screw covers.
Change position of
bottom hinge cover
Change position of
top hinge cover
using double sided
adhesive tape
available in bag of
Replace cover and
screw on.
Remove screw
covers on
handles,
unscrew
handles.
Use hole cover
in bag of spare
parts
39
Publicité
