Publicité
NOTE: Use a soft, damp cloth to clean the clear window of the
Waring Ellipse
NOTE: Do not overcharge the Waring Ellipse
should not be left on charging station indefinitely. This will degrade the
battery over time. To preserve battery life of the Waring Ellipse
only charge when needed.
3. Please ensure the Waring Ellipse
placing the drive on the jar.
NOTE: When blender is not in use, place Waring Ellipse
docking station for easy access.
1. The Waring Ellipse
parts: the lid and the dasher. Each individual piece cannot operate
without the other.
2. Assembly: The dasher features two locking tabs on
each of its sides. In order to properly assemble the
dasher into the lid, insert the dasher into the bottom
of the lid (as shown in the image to the right) until
each of the locking tabs clicks into place. Once in
place, the dasher is securely locked to the lid and
can be placed on the Waring Ellipse
3. Disassembly: In order to disassemble the dasher
from the lid, gently press inward on the two locking
tabs. This will disengage the dasher from the lid. Gently
press down on the locking tabs pushing through the lid
using both thumbs.
NOTE: Please perform this operation over a sink or counter to prevent the
dasher from falling and being damaged.
NOTE: The Waring Ellipse
inside of the lid and the second located around the outside of the lid.
Both gaskets must be in place before running the Waring Ellipse
Both gaskets must be removed and cleaned at the end of each service
day or as needed.
Your Waring Ellipse
option for your Waring Ellipse
blender base or on the right or left side, depending on your storage and/or usage needs.
NOTE: The docking station is not a charging device. It will not charge your Waring
Ellipse
drive when in place.
™
drive. This will ensure the drive runs properly.
™
WARING ELLIPSE
dasher system is made up of two
™
™
WARING ELLIPSE
blender comes with a docking station that functions as a storage
™
drive. The docking station can be placed in front of your
™
dasher and lid are in place before
™
DASHER SYSTEM
™
jar.
™
lid features two gaskets, one located on the
DOCKING STATION
™
8
drive. Waring Ellipse
™
drive on the
™
drive
™
drive,
™
Lid
Dasher
system.
™
Publicité
