Télécharger Imprimer la page

Waring Commercial Ellipse MXE2000E Mode D'emploi page 7

Publicité

CAUTION: Store the Waring Ellipse
temperature only. Avoid exposure to high temperatures to prevent damage.
1. Your Waring Ellipse
station. Please ensure you fully charge your Waring Ellipse
using it for the first time and after every service day.
2. Connect cord to charging base and plug adapter into a wall outlet.
3. Before first use, place your Waring Ellipse
charge for 3 hours. The LED will indicate your battery level.
a. Low battery (1-25%) = Blinking red
b. Medium battery (26-75%) = Blinking orange
c. High battery (76-99%) = Blinking green
d. Full battery (100%) = Solid green
4. Once your drive has reached the solid green stage, your Waring Ellipse
drive is fully charged and ready to use.
NOTE: The drive can be used at any percentage level. For best results,
fully charge your drive at the end of every service day.
OPERATING YOUR WARING ELLIPSE
1. The Waring Ellipse
or manually:
– Automatic activation: Press and hold the AUTO
START button for 3 seconds (Fig. 1). The green
LED will blink, which indicates the drive is in Auto
Start mode. The Waring Ellipse
upon closing the sound enclosure, and it will run
continuously for 30 seconds or until the sound
enclosure is opened.
NOTE: To deactivate the Auto Start mode, press
and hold the AUTO START button for 3 seconds.
The green LED will stop blinking.
– Manual activation: Press one of the three time
buttons on top of the drive (Fig. 2). The Waring
Ellipse
during the set time (10, 20 or 30 seconds).
NOTE: To pause or cancel the manual mode, press any of the time
buttons again.
IMPORTANT: Never operate the unit without the dasher system.
2. At the end of every service day, place the drive on the provided charging
station to ensure it is fully charged for the next service day or shift.
NOTE: The Waring Ellipse
depending on battery life. Each full charge can last up to 8 hours,
depending on use.
GETTING STARTED/CHARGING
YOUR WARING ELLIPSE
Blending System comes with one single charging
drive can be activated automatically
drive will start, and it will run continuously
chargers and Waring Ellipse
drive on the charging station and
drive will start
drive will fully charge in 2 to 3 hours,
7
DRIVE
drive at room
drive before
DRIVE
FIGURE 1
FIGURE 2

Publicité

loading

Ce manuel est également adapté pour:

Ellipse mxe2000k