Publicité
NOTE: IN ORDER TO MINIMIZE POSSIBILITY OF SCALDING, TEMPERATURE
OF WASHING SOLUTION AND RINSE WATER MUST NOT EXCEED 46°C, AND
QUANTITY USED MUST NOT EXCEED ¼ CONTAINER FULL.
TO SANITIZE AND DRY CONTAINER:
1.
Wipe down exterior of container with a soft cloth or sponge dampened
with sanitizing solution.
2.
Fill container with sanitizing solution, cover, place on motor base, and run
on high speed for two (2) minutes. Empty container. Dislodge any residual
moisture from blade assembly by placing empty container on motor base
and running on the highest speed for two (2) seconds.
3.
Sanitize lid by immersing in sanitizing solution for two (2) minutes.
4.
Do not rinse container or lid after sanitizing is completed.
Allow parts to air-dry.
1. Clean and sanitize motor base prior to initial use and after each use.
2.
UNPLUG POWER CORD. Wipe down exterior surfaces of motor base with
soft cloths or sponges dampened with washing solution, rinse water, and
sanitizing solution. Prevent liquid from running into motor base by wringing
all excess moisture from cloths or sponges before using them.
DO NOT IMMERSE MOTOR BASE IN WASHING SOLUTION, RINSE
WATER, OR SANITIZING SOLUTION.
3.
Allow motor base to air-dry before using.
Any other servicing should be performed by an authorized service
representative.
IMPORTANT
MOTOR BASE
16
Publicité
