Compex Sport Elite Manuel D'utilisation page 43

SPECIFICATIONS
TABLE 4: RECOMMENDED SPACING BETWEEN A
PORTABLE AND MOBILE COMMUNICATION APPLIANCE
The Compex Sport Elite is designed for use in an electromagnetic environment in
which radiated RF waves are controlled. The buyer or user of the Compex Sport
Elite can contribute to preventing electromagnetic interference by maintaining a
minimum distance between RF portable and mobile communication appliances
(transmitters) and the Compex Sport Elite according to the table of recommendations
below and according to the maximum output power of the telecommunication
appliance.
Maximum
Transmitter
Output Power
W
0,01
0,1
1
10
100
In the case of whose maximum output power is not shown in the table above, the
recommended spacing of d meters (m) can be calculated using the appropriate equation for the
transmitter frequency, where P is the maximum output power of the transmitter in watts (W) as
set by the transmitter manufacturer.
NOTE 1:
At 80 MHz and at 800 MHz, the spacing for high frequency amplitude is applied.
NOTE 2: These guidelines may not be appropriate for some situations. Electromagnetic wave
propagation is modified by absorption and reflection due to buildings, objects, and
persons.
AND THE COMPEX SPORT ELITE
Spacing according to the frequency of the
From 150
kHz to 80
MHz
d = 1.2√P
0,12
0,38
1,2
3,8
12
transmitter m CISPR 11
From 80
MHz to
800 MHz
d = 1.2√P
0,12
0,38
1,2
3,8
12
38
From 800 MHz
to 2.5 GHz
d = 2.3√P
0,23
0,73
2,3
7,3
23