Publicité
7
Place Decorative Caps: Place the decorative caps (24) onto the bolts
8
Reattach Toilet Seat: Align the holes on the toilet seat (23) again with the pins on the
mounting plates (27) Push down until the toilet seat (23) snaps into place
9
Apply Caulk: Use a caulking gun to apply caulk between the toilet assembly and the
floor to seal the gap
07.6 Final set up of the cistern
1
Connect Water Supply: Connect the fill valve to the water supply and turn on the
water supply to fill the cistern
2
Adjust Water Level: The water level is determined by the position of the float (33) Use
a cross-head screwdriver to adjust the water level by inserting it into the top of the water
level adjustment rod (38) Rotate clockwise to increase the water level and anticlockwise
to decrease it
| EN |
25
Publicité
