Samsung HW-LS60D Guide Rapide page 3

01 CHECKING THE
COMPONENTS
• Wireless Speaker • Wallmount
main unit
• Stand
• AC/DC Adapter
• Power Cord
• Photo Frame
• Component for
Art Panel (sold
separately)
‒ Holder-Plate x 4
‒ Holder-Guide x 1
NOTE
• To purchase additional components or optional
cables, contact a Samsung Service Center or Samsung
Customer Care.
02 PRODUCT OVERVIEW
Front
1
(Multi Function) Button
In standby mode, press the
button to turn on the Wireless Speaker.
Press the (Multi Function) button to change
the mode.
(Mic On/Off) Button
Press the button to turn the microphone on or
off.
When the microphone is off, the LED indicator
will light red.
To switch to Bluetooth Pairing state, press and
hold the (Mic On/Off) button on the side of
the Wireless Speaker for more than 5 seconds.
LED indicator
1
The LED Indicator flashes, glows, or changes
color depending on the Wireless Speaker's
current mode or status.
Rear
Component
‒ Wallmount Guide
‒ Bracket-Wall
Rear x 1
‒ Screw (M5 X L55)
x 2
‒ Anchor x 2
‒ Holder-Screw x 1
‒ Spacer x 2
03 CONNECTING THE
Connecting the power and units
Volume
• For more information about the required electrical
(Multi Function)
ENG - 3
D.IN
(OPTICAL)
D. IN (OPTICAL)
Connect to the digital (optical) output of an external
device.
SMARTTHINGS DONGLE
Connect the SmartThings dongle(Purchase separately)
to use the SmartThings Hub function.
DC 19V
Connect the AC/DC power adapter.
(Power Supply In)
POWER
DC 19V
AC/DC Adapter
power and power consumption, refer to the label
attached to the product. (Label: Rear of the Wireless
Speaker Main Unit)
SMARTTHINGS
DONGLE DC 19V
Power Cord