Publicité
Changing the Cutting Disc:
1) Switch off the machine and wait until the disc stops moving.
2) Unscrew the 4 screws as shown in Picture 8.
3) Use the provided accessories spanner to release the screw by inserting a screwdriver
through the middle hole (Picture 9).
Picture 8
Folding the Stand:
1) Fold up the stand as shown in Picture 10-2.
2) The final effect should look like Picture 10-3 and 10-4.
Picture 10-1
EN
Picture 9
Picture 10-2
Publicité
