Publicité
Temperature setting and control panel
4- Programming key (not accessible to the user) Selection key
See the set point
1.
Short press and release the
2.
Short press and release the
normal.
Change the set point
1.
Hold the
key for more than 2 seconds to modify the set point value.
2.
The current set point value will be displayed, and the "℃" symbol will start blinking.
3.
Use the UP or DOWN arrows within 10 seconds to adjust the value.
4.
Press the
key again, or wait 10 seconds, to save the new set point value.
Manual Defrost
This equipment requires manual defrosting at least once a month, as it does not have an automatic defrost
function.
NOTICE! The defrost cycle begins from the moment the appliance is first powered on.
Method to manually defrost the appliance:
1.
Press and hold the DEFROST
2.
The defrost cycle will begin immediately, and the defrost LED will light up. The cycle will run for 20
minutes.
NOTICE! Initiating a manual defrost will reset the automatic defrost timer. The next automatic defrost
will occur 12 hours after the manual defrost cycle is completed.
EN
1- Defrosting light
2- Compressor operation light
3- Digital thermostat
5- Temperature modification keys
key to display the set point.
key again or wait approximately 5 seconds for the display to return to
button for 5 seconds.
Publicité
