Publicité
This User Manual has been translated using machine translation. We have made every effort to
ensure the translation is accurate, but please note that automated translations are not perfect
and are not meant to replace human translators. The official version of the User Manual is in
English. Any differences between the translated version and the original English are not legally
binding. If you have any questions about the accuracy of the translation, please refer to the English
version, which is the official reference. More language versions are available upon request via
info@expondo.com.
Technical data
Parameter description
Product name
Model
Voltage [V] / Frequency [Hz]
Power [W]
Cutting speed [sec]
IEC protection class
Insulating grade
Protecting grade
Duty cycle
Cutting capacity [mm]
Dimensions (Width x Length x Height) (mm)
Weight [kg]
Purpose
The product is designed to quickly and safely cut through reinforcing steel bars (rebar) used in concrete
structures, ensuring precise lengths and clean cuts. It improves efficiency and safety on construction sites by
providing a fast, reliable alternative to manual or makeshift cutting methods.
Operating instructions
Pre-use Checks
1. Check oil level.
2. Inspect cutter blocks for condition and tightness of bolts.
CAUTION! Using loose or cracked cutter blocks may result in injury to the operator and
damage to the unit.
3. Check that the power source is appropriate for the cutter.
CARE If the voltage is too high, the motor will burn out. If the voltage is too low, insufficient
power will be generated. Never use DC current.
4. Ensure the power supply is properly earthed.
EN
Parameter value
Rebar cutter
230~ / 50
1200
3- 5
IPX0
4 - 16
230x470x140
8.2
S1
4 - 20
120x405x215
12.25
Publicité
