Publicité
COMPRESSOR
PROTECTION
MEMORIZE
AUTOMATIC
RESTART AFTER
POWER FAILURE
INNER DRY
HUMIDIFY LIGHT
INDICATOR
HIGH & LOW
SILENT
EMPTY THE WATER TANK
There are three ways of emptying the water tank. The fi rst is doing so manually, the second is by
using a manual continious drainage and the third one is with a pump drain.
Only remove the tank when the appliance is not in operation
and unplugged.
MANUAL PROCESS
1.
Remove the tank, see pic 1, from the unit.
2.
Grab on fi rmly to the tank and prevent any water dropping from the tank.
3.
Empty the tank carefully in a sink or other location specifi ed for drainage
water.
4.
Clean the tank if necessary with a dry cloth.
5.
Place the tank in the appliance.
MANUAL CONTINUOUS DRAINAGE
Caution: It is important to use the manual drain when the appliance is not used for a long
time.
The dehumidifi er has a continuous drainage hole at the
bottom of the machine, see pictures below. Remove
the drain stop
and use a plastic drainage tube to
q
insert in the drainage hole
drainage tube from the bottom of the machine. Make
sure the drainage pipe is straightened out, the water
can be drained from the machine through the drainage
hole. The maximum drainage height difference is 4
meters.
Manual_D 825 PA Smart ('24) V3 .indd 35
Manual_D 825 PA Smart ('24) V3 .indd 35
This appliance is equipped with compressor protection function—that
is, compressor has fi ve minutes period between operation start and
shut down.
The appliance will memorize the previous setting when plugged in.
(Child lock and Timer will not be memorized). The appliance will
operate in default setting when power plug is disconnected.
The appliance will automatically turn on and operates in the last
setting after power returns. (Timer will not be memorized).
Press the purify button for 3sec can turn on/off the inner dry function.
When the inner dry function is activated, the % symbol will keep
fl ashing.
1. When ambient humidity is ≥80%, it will show a red light.
2. When ambient humidity is ≥56% and ≤78%, it will show a yellow
light.
3. When ambient humidity Is≤54%, it will show a blue light.
When the ambient humidity is over 90%. The display will show HI.
When the ambient humidity is lower than 32%, The display will show
LO.
Press the TIMER button and SPEED button at the same time to turn on/
off the sound. Only the button beeper sound will be mute. The alert
will still make noise to remind user.
. Water will go out of the
w
4
4
35
10-10-2024 15:29
10-10-2024 15:29
Publicité
