Acksys RailBox Série Guide D'installation Rapide page 32

AP mode only
Network topology
Security
Client/Bridge mode only
Network topology
Security
Mesh mode only
Network topology
Security
Power supply
Coding serie A:
24V , 48V
nom nom,
96V 110V
nom, nom,
Electrical connection
requirement
Coding serie P:
PoE +
Wi-Fi interface
Number of interfaces
Radio mode
Modulation rates
Frequency range for
802.11a/n/ac
Frequency range for
802.11b/g/n/ac
Antenna plugs
(Antennas not provided)
72V
nom,
DC
Infrastructure
WEP, WPA (2)-PSK, WPA (2) with
802.1x authenticator, SSID visibility
status
Infrastructure, ad-hoc modes
WEP, WPA (2)-PSK, 802.1x
supplicant. AES/TKIP/WEP by
hardware encryption
802.11s
SAE/AMPE
Wide range dual input power supply,
from 24V to 110VDC according to all
EN50155 nominal voltages, polarity
protection; 4-pole M12 plug A coding,
Power supply requirement 25W.
The circuit breaker must have a
nominal current In compatible with the
needed RailBox power (twice larger)
Also, the circuit breaker must have a
supported inrush current of 10xIn
These products must be powered by a
PoE+ (802.3at type 2 class 4) power
source connected to LAN2
1 or 2
Support for IEEE 802.11a, 802.11b,
802.11g, 802.11n and 802.11ac
802.11ac 5GHz: jusqu'à 1.7333 Gbps
802.11ac 2.4GHz: jusqu'à 800 Mbps
802.11n: up to 600 Mbps
802.11a : 6 to 54 Mbps
802.11g: 1 to 54 Mbps
802.11b: 1 to 11 Mbps
5 GHz; 5.150 to 5.850 GHz
2.4 GHz; 2.412 to 2.484 GHz
QMA-type female antenna plugs
1 radio:
2 radios:
-14-
4 antennas connectors
8 antennas connectors