Publicité
Drain the water in the pipeline when not in use for a long time
1. Pull out the power plug to cut off
the power.
2. Close the inlet angle valve, unscrew
the hose from the angle valve, drain
the water in the pipeline and reinstall
it.
For safety, it is recommended to put antifreeze
into the accumulated water in the toilet.
Before opening the angle valve, the power must be
cut off! When using the toilet again, be sure to
connect water supply first, then plug in.
When water and electricity are cut off
1. Flushing during power outage
(under the condition that the spare
battery box is connected and has
filled battery ）
Long press ≥ 2seconds the side button to flush.
2.Flushing during water outage
Flush the toilet with external water (pour approx.
Beware of overflow.
17
TIPS
Manual flush button
2
Gallons water into the bowl).
Publicité
