Publicité
11
1-1. Stick the remote control rack horizontally to the pre-installation area on the wall, and mark the position of
two installation holes on the wall with a marker. Use a drill bit with a diameter of 6mm to drill holes at the
marked positions on the wall, with a depth of 1.4in.
Install the expansion pipe into the wall hole, attach the hanger to the wall, align the hole on the hanger with
the expansion pipe, and place the screw to lock it.
1-2. Clean and dry the pre-installed area of the remote control rack on the wall.
Tear off the double-sided adhesive sticker on the back of the hanger and stick it horizontally to the wall.
11
Publicité
