Publicité
Water temperature adjustment
When cleaning, the water temperature is adjustable with 6 gears. When in off gear,
the water flows in ambient temperature and the indicator light is off.
Air temperature adjustment
When drying, the air temperature is adjustable with 6 gears. When in off gear, it blows
in ambient temperature and the indicator light is off.
Seat temperature adjustment
The seat temperature is adjustable with 6 gears. Please do not cover the seat sensor in
case of sensing failure. The seat temperature will switch to 1st gear after long time
sitting in case of low-temperature burns.
Control function setting
1.Nozzle manual cleaning function
Press the "Stop" button and "Rear wash" button on the remote control for 3 seconds at the same
time to enter the manual cleaning procedure.
Manual cleaning procedure: the nozzle extend out with self-clean water flowing, after it extend to
the longest postion, water stop flowing. At this time, detach the nozzle from the cleaning module
and using a soft cloth to wipe the nozzle.
When there are 3 seconds left for cleaning, the beep will make 3 sounds.
After procedure is finished, the nozzle retracts automatically.
•During the manual cleaning process, press the "Stop" button on the remote control or
knob to exit the manual cleaning mode and the nozzle will retract;
•After the manual cleaning is completed or stopped halfway, the nozzle retracts automatically.
14
Press and hold the "Stop" and "Rear Wash"
buttons on the remote control 3 seconds.
Enter the manual cleaning mode
to clean the nozzles.
Publicité
