Publicité
Check the tightness of the threaded connection to make sure there is no water leakage.
Turn the angle valve counterclockwise and adjust the opening to the maximum.
Plug the leakage protection plug into the power socket, press the reset switch, and the plug indicator light will
be on, indicating that it is powered on.
*Press the leakage test key before use, the reset switch pops up, indicating leakage protection. The protection
function is normal.
*Press the TEST button (then RESET button) every month to assure proper operation.
*It is applicable to the model with leakage protection plug.
10
9
10
Reset switch
Test button
Publicité
