Télécharger Imprimer la page

AE Bath T6-ST-WHT Guide D'installation page 12

Publicité

Indicator light :
Non-functional Status: Press this button to activate the flushing function.
During Operation: While the machine is running functions,press this button to halt the ongoing procedure.
Note: Under non-seated situation, long press this button to enter standby mode, in which mode the night
light automatically off. Press any button to quite standby mode.
Press this button to start the rear wash function. Press this button again to perform
oscillating massage. If you press the Stop key halfway, you can stop it immediately.
Note: Under the oscillating massage procedure, the nozzle will extend and retract repeatedly to
achieve the massage effect.
Press this button to start the front wash function. Press this button again to perform
oscillating massage. If you press the Stop key halfway, you can stop it immediately.
Note: Under the oscillating massage procedure, the nozzle will extend and retract repeatedly to
achieve the massage effect.
Other function / Autre fonction / Otras funciones:
1.Automatic pre-wetting inner bowl after human on seat ≥2 seconds.
2.When 10 seconds ≤ seating time ≤30 seconds, system perform half flushing after human leave
the seat;
3.Seating time > 30 seconds, system perform full flushing after human leave the seat.
Pulse massage
When performing rear washing and front washing functions, press the
massage button on the remote control to enter the pulse massage mode.
Night light
Press this button to switch the night light to two modes: on, off mode.
Note: Long press this button for 5 seconds to turn on/off the indicator light on the machine.
Half Flush
Press this button to perform the half flush function.
12
Toilet Features
Flush/Stop
Rear Wash
Front Wash

Publicité

loading