Publicité
Liens rapides
YQ PIONEER'
The Art of Entertainment
PID-95
PL-65
PD-5901
COMPACT DISC PLAYER
LECTEUR DE COMPACT DISC
PID-595
COMPACT DISC TRANSPORT
TRANSPORTEUR DE
COMPACT DISC
@ The illustration shows PD-S901,
@
Liillustration montre le PD-S901
Operating instructions
Mode d'empiloi
DIGITAL AUBIO
English
a
Thank you for buying this Pioneer product
Please read through these operating instructions so you will know
how to operate your model properly. After you have finished reading
the instructions, put them away in a safe place for future reference
In some countries or regions, the
power
outlet may sometimes
diffe
However,
the method
of connecting
and
explanatory drawings.
operating the unit is the same.
WARNING:
To PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear panei.
Please write this serial number on your enclosed warranty card
and keep it in a secure area. This is for your security.
[For Canadian model]
CAUTION:
To PREVENT ELECTRIC SHOCK DO NOT USE
THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
ATTENTION: pour PREVENIR LES CHOCS ELECTRIQUES
NE PAS UTILISER CETTE FICHE POLARISEE A
PROLONGATEUR, UNE PRISE DE COURANT OU
:
SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ETRE
INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A
DECOUVERT.
"This product complies with the Radio Interference require-
ments of the EC (European Community} Directive 87/308/EEC."
vape of the power
plug and
from that shown
in the
TWO VOLTAGE SELECTOR SWITCHES
Only multi-voltage
models
are provided
with these
switches. U.S., Canadian, European, U.K., and Australian
models are not provided with these switches.
Mains voltages in Saudi Arabia are 127V and 220V only,
Never use this model with 110V setting in Saudi Arabia.
The line voltage selector switches
are located on the rear
panel of this player. Before your playe
oped from the
factory, these switches are set to the power requirements
of the player's destination.
Check that they are set properly
before plugging the power cord into the outlet. Hf the voltage
is not properly set or if you move to an area where the
voltage requirements differ, adjust the selector switches as
follows:
e@ Use a medium-sized (flat blade}
ewdriver.
insert the
tip of the screwdriver
into the groove of the selector
switches and turn it so that the power voltage marking of
your area faces ihe atrow.
Be sure to adjust both
switches.
Publicité
