Hapro LUXURA VS Mode D'emploi page 11

+
Body cooling
Stop
higher
A
B
Body cooling
lower
+
Stop Body cooling
` lower
C
D
Reading out the Counters :
In order to read out the counter of the tubes, the "stop" button and the "body cooling higher" button must be pressed
simultaneously for three seconds.
Timing indicator x 10 = working hours tubes
Example:
a. 759 hours is indicated as 75
b. 9760 is displayed alternately with 1 second intervals as: 9 - 76 - 9 - 76
By pressing the "body cooling lower" button for 10 seconds, the counter is reset at 0 hours.
The counter for the entire machine gives the total number of hours, including the ventilation time. By pressing the "stop
and body cooling lower" buttons simultaneously for three seconds, the timer can be read off the display.
Timing indicator x 10 = working hours tubes
Example:
c. 759 hours is indicated as 75
d. 9760 is displayed alternately with 1 second intervals as: 9 - 76 - 9 - 76
Note: This timer cannot be reset to "0" .
11