Publicité
Model: Kawasaki ZX-9R
Type: ZX900C1/D1
Important: If you are not a trained motorcycle mechanic stop now. Ask a local
motorcycle shop to do the work for you.
instructions.
Recommended bar:
Brake hose:
Rerouting cables:
Throttle cable (1):
right from steering head,
behind slider tube
Clutch cable (2): lock at the Instructions
Choke cable (3):
left from steering head, behind
slider tube
Faring and the fairing screen need to be cut.
Instructions:
Demount the original top yoke. Place the bushing ∅40mm on the top of the steering head
and then mount the LSL top yoke with original nut and thinner washer.
Mount the 90° bracket for the brake fluid reservoir with washer and screw M6×30mm at the
brake unit. To make sure that the hose of the brake fluid reservoir is not fold up shorten it by
45mm.
Exchange the original clutch cable against the longer clutch cable. The lead is as original.
Lead the throttle cables through the right side frame eye.
Cut the fairing to the level of the fixing points of the original mirrors.
To mount new mirrors at the handlebar, you have to order clamping pieces separate.
Fitting instruction Superbike-Kit
Part no.: 120K084
Type 01 (A01 / E01 / L01)
38cm (38BB)
(2)
(3)
LSL-Motorradtechnik GmbH • D-47809 Krefeld
www.lsl.eu
Please read the LSL-Superbike-Kit Fitting
Year: ´98-99
(1)
Rev. 01 22/01/2009
Publicité
