Publicité
OWNERS MANUAL
Princeton Pro Direct to Stud Tile Walls
3961BWT60.020
INSTALLATION INSTRUCTIONS
Thank you for selecting American Standard – the benchmark of fine quality for over 150 years. To ensure this
product is installed properly, please read these instructions carefully before you begin. Certain installations may
require professional help.
INSTALLATION PREPARATION
• Please unpack carefully and identify all parts needed for installation by using the Box Contents as a reference.
Inspect the product and report any damages or missing parts immediately to customer care by calling
855-815-0004. Follow the prompts for consumer/bathing products.
NOTE: Take extra care in handling the front surfaces of the walls. Use only non-abrasive cloths to
avoid scratching.
• These Princeton Pro Direct to Stud Tile Walls were developed to be installed with Princeton Tubs. If you are
using a different tub, you may need additional hardware and tools to complete the installation.
• The Princeton Pro Direct to Stud Tile Wall dimensions are nominal and meant for standard 60x30"x60
(1524x762x1524mm) alcoves. Alcove sizes may vary based on stud and wall material thickness.
Please double check your measurements prior to starting your install.
• Wear protective equipment during installation to avoid injury.
• Please keep these instructions for after care and customer service details.
BEFORE YOU BEGIN
Inspect your product thoroughly before installing. Take extra care in handling surfaces
of the walls and use only non-abrasive cloths to avoid scratching. Observe all local plumbing
and building codes.
3-piece Wall Sets
™
Publicité
