Publicité
1. Take the vacuum stopper (see Fig. V-1) and insert it firmly into the
neck of the bottle (see Fig. V-2).
2. Pull the piston (7) (see Fig. V-3) and then push it down (see Fig. V-4).
3. Repeat the movements several times to pump out the air.
Troubleshooting
1. The wine opener stops during the uncorking process. Possible
cause: low battery charge. Solution: charge the device.
2. The worm cannot go deep into the cork. Possible causes: the tip of
the worm is damaged; the worm met the side of the bottle's neck.
Solution: press and hold the upper part of the cork removal/ejection
button until the worm comes completely out of the cork. Thoroughly
inspect the tip of the worm: if it is damaged, stop using the wine
opener and contact an authorized service center. If the worm is in
good condition, continue uncorking the bottle, making sure to hold
the wine opener vertically, without tilting it.
3. The cork is stuck inside the wine opener; the cork removal/ejection
button does not work. Possible cause: the worm is blocked. Solution:
press the lower part of the cork removal/ejection button to unblock the
worm. If it then begins to rotate, try uncorking the bottle again. Press and
hold the upper part of the cork removal/ejection button until the cork
comes completely out of the wine opener.
4. The indicators of the device do not blink or glow. Possible causes:
the battery is discharged; defective device or faulty indicators.
Solution: charge the device and check, if necessary, that the cable is
in good order; contact an authorized service center.
If you experience any issues or difficulties while using the device,
please email support at support@prestigio.com, chat with us online
at prestigio.com, or contact us via the feedback form at
prestigio.com/contact-us. For up-to-date information about
service centers, visit prestigio.com/use.
ATTENTION! Do not use a faulty device or accessories. If the steps
described above have been completed but the device is still not working
properly, contact an authorized service center.
ASBISC reserves the right to modify the device and make revisions and changes to
this document without prior notice to users and is not liable for any negative
consequences resulting from the use of an outdated version of the document, as
well as for any possible technical and typographical errors or lapses, incidental or
consequential damages that may arise from the transmission of this document or
using the devices. The warranty period and service life are 2 years from the date of
retail sale of the product.
For up-to-date information and details about the device, connection and
operation steps, and certificates and warranty terms, see the full user manual
available at prestigio.com/wine-accessories/prestigio-nemi. Manufacturer: ASBISC
Enterprises PLC, Iapetou, 1, Agios Athanasios, 4101, Limassol, Cyprus. Made in
China. The date of manufacture is marked on the package. All trademarks and
trade names used herein are the property of their respective owners.
8
PWO103SL_EN
©Prestigio
Publicité
