Publicité
User's manual | BANKER Safe
5.4. Master code change
By default, the master code is 12345678. We strongly recommend changing it by following these
steps (You will need to have the door open):
1. Press the "OK" arrow until the display shows "MASTER MENU".
2. Enter the master code. If you have not changed the factory code, enter 12345678.
3. Press the "→" arrow until the display shows "CHANGE MASTER CODE" and press "Ok".
4. Enter the new 8-digit code twice in succession.
5. The display will show "OPERATION DONE" if the code has been changed successfully. Otherwise, you
will need to return to step 1.
For your safety, the manual does not show all possible configurations. For more informa-
tion, please contact your dealer.
Please note that you will need to provide him with the safe's serial number, located in the
lower right-hand corner of your safe door.
6. Anchoring instructions
Please refer to the anchoring instructions in the manual included in the documentation folder.
7. Technical data
Banker E
Bolts
External size
(h x w x d - mm)
Inner size
(H x W x D - mm)
Body thickness
Door thickness
Reblocking
Anchor holes
Lock
Extra protection
55 E (10991)
Ø35 mm distributed around the perimeter of the door
550 x 550 x 520
423 x 435 x 336
In the event of a violent attack, several locking systems condemn the
Electronic lock VdS Class 2, B EN 1300 (ANSI/UL-768 1R), mechanical mor-
tise lock (VdS Class 2, B EN 1300)
Body filled with vandal-proof concrete with steel fibres.
840 x 550 x 520
713 x 435 x 336
58 mm
60 mm
closing elements
1 floor - ø16 mm
85 E (10993)
EN
19
Publicité
