Publicité
22 ̊ C
21.5 ̊ C
21 ̊ C
20.5 ̊ C
20 ̊ C
19 ̊ C
18 ̊ C
16 ̊ C
The speed is controlled automatically and the max speed corresponds to 30 dB(A).
Boost function: The unit runs at maximum speed for 15 minutes. The LED's are flashing slowly.
Deactivating
Briefly press the [+] button. After 30 seconds, the new settings are automatically saved and the device returns to the
selected mode..
De boost mode automatically stops when the water temperature is > 18°C when cooling or < 28°C when heating.
3.1. NOTIFICATIONS
Blue LEDs are
flashing: the water temperature for cooling is too high
Red LEDs are
flashing: the water temperature for heating is too low
Control panel error codes
LED flashes rapidly in the color of the set mode.
MODE
MODE
MODE
MODE
The LEDs are blinking in a pattern and in the color that matches the selected mode
Only if the window contact is connecrted and switched on: The window contact is open.
MODE
MODE
MODE
66
MODE
MODE
MODE
3 sec
Error sensor - Check the water temperature sensor
Error sensor - Check the room temperature sensor
MODE
MODE
MODE
JAGA NV | BRIZA M - TPT | MANUAL | 14.10.2024 | V.1.07
20 ̊ C
20.5 ̊ C
21 ̊ C
21.5 ̊ C
22 ̊ C
23 ̊ C
24 ̊ C
26 ̊ C
MODE
MODE
MODE
Publicité
