Publicité
2. ELECTRICAL CONNECTION
The unit automatically switches to the heating mode as soon as the water temperature is higher than 28°C and 4°C higher
than the room temperature. The unit will start at the speed last selected(1,2 or 3). When one of the two conditions is no
C o n d e n s p o m p : N e e
longer met, the unit automatically returns to standby.
The unit automatically switches to the cooling mode as soon as the water temperature is lower than 18°C and 2°C lower
V o e d i n g : D i n - R a i l v o e d i n g
than the room temperature. The unit will start at the speed last selected" (1,2 or 3). When one of the two conditions is no
longer met, the unit automatically returns to standby.
C o n t r o l l e r : A C O ( 2 P ) [ D P C . B R C 6 2 3 ]
The breeze mode is manually switched on or off, regardless of water temperature. As long as the breeze mode is active,
the auto-changeover is deactivated .
Tw > 28C
When heat or cold are requested, a BMS/home automation system will open up the thermoelectric valve.
2.1. DIN RAIL POWER SUPPLY
STIFF WIRE CROSS-SECTION 0,2-1,5MM²
(26-16 AWG) STRIPPING LENGTH 10MM
JAGA NV | BRIZA XS - ACO | MANUAL | 14.10.2024 | V.2.05
Tw < 18C
Tw = /
N
L
2 3 0 V A C
EN
43
Publicité
