Publicité
- Defects of supervision, maintenance and maintenance
- Maintenance due to normal wear and tear
- Maintenance of the product not in accordance with the instructions of the manual
- Any adaptation of the product that would be necessary for compliance with the technical or
safety standards applicable in a country other than that for which the product was originally
designed and manufactured
- Use or installation that does not conform to the use for which the product is intended or to
the technical or safety standards in force in the country where it is used
- Non-observance of instructions, safety precautions and instructions stipulated in the manual
- A case of force majeure, sinister (fire, flood, etc.), lightning, etc.
- A modification or repair of the product not carried out by a qualified professional
- Use of parts and accessories not compatible with the product or defective
- Immediate or delayed damages resulting from improper handling during transport,
mishandling, falling, shock, contact with water, sand or any other substance, etc.
- Improper treatment of the product due to inappropriate environment (poor aeration,
exposure to moisture or strong heat, vibration, non-adapted power supply, surge, etc.)
Whether with respect to the purchaser, installer or any other person, our company
cannot under any circumstances be held liable for any physical or material damage of
any kind whatsoever, which may be caused by our products or which would be the
direct or indirect consequence of the use of our products.
3. NOTES
In most houses, the ceiling fan is placed in the center of the room, replacing a light. In this
way, the ceiling fan provides evenly distributed airflow throughout the room.
Since a ceiling fan typically requires no more power than a light, the existing electrical circuit
should not be overloaded. But if the ceiling fan is equipped with lamps, make sure the
electrical circuit is strong enough to support the load. If this is not the case, you will need to
install a new circuit with a new circuit breaker on the main electrical panel or an auxiliary
panel so that the ceiling fan has its own circuit without powering any other device. If there is
no central light in the room, you will need to define a location where the ceiling fan will be
installed and carry electricity.
A connection box is required. Never use a plastic box.
FANELITE ceiling fans can weigh up to 25 kg with accessories. Make sure that your ceiling
fan hanger bracket is firmly attached and that your installation can support a weight of at
least 50 kg.
For your own safety and that of others, please check the weight of your ceiling fan and adjust
the resistance of your installation if necessary. The ceiling fan hanger bracket must be
supported by the ceiling structure.
Your installation must also be able to withstand the vibration caused by your ceiling fan when
it is working. Even a well-balanced ceiling fan causes vibration when it works.
4. WIFI COMPATIBILITY
This model is compatible with Wifi technology. The Wifi receiver ref FANWIFI1 sold
separately allows you to control your ceiling fan by using your Smartphone. The Wifi receiver
connects to the receiver of the remote control.
Once the Wifi receiver is installed and connected, simply download our free application
FANELITE-w on your Smartphone.
19
Publicité
