Inputs And Outputs; Voltage Supply Connection - Baumer TA1200 Guide Utilisateur

3.2 Inputs and outputs

Signal input
PNP
NPN
TTL
NAMUR
Magnetic sensor
Contact
Voltage 10...600 VAC

3.3 Voltage supply connection

There are several options for operation supply. Power supply must
be fed in via the recommended external fuse.
Operating voltage
85...265 VAC, (50/60 Hz) and 100...300 VDC
21...53 VAC, (50/60 Hz) and 10.5...70 VDC
www.baumer.com
Specification
High level >2.6 V
Low level <2.4 V
Input resistance 1.5 k
High level >2.6 V
Low level <2.4 V
Input resistance 3.9 k
High level >2.6 V
Low level <2.4 V
Ion <1 mA, Ioff >3 mA
Input resistance 1.5 k
Vin >30 mVeff at 60 Hz
Vin >300 mVeff at 6 kHz
Input resistance 3.9 k
Measuring the frequency of the
voltage
External protection
M 100 mA
M 500 mA
TA1200
17