Publicité
Product description
Cooking surface layout
Control knob
Symbol
0
Off position
1 - 6
Heat settings
Daily use
Warning! Refer to Safety chapters.
Before first use
Put cookware containing water on each cooking zone,
set the maximum position and operate the hob for 10
min. This is to burn off the residue in the appliance.
After that, operate the hob at minimum position for 20
min. During this period, an odour and smoke can occur.
This is normal. Make sure that the airflow is sufficient.
Using the rapid hot plate
A red dot in the middle of the plate shows a rapid hot
plate. A rapid hot plate heats up faster than usual
plates. The red dots are painted on the plates. They can
deteriorate during use and even disappear completely
after a period of time. It does not have an effect on the
performance of the hob.
The heat setting
To set or change the heat setting turn the knob to the
correct heat setting. To deactivate turn the knob to off
position.
Power indicator activates when one or more cooking
zones are activated. When you deactivate the cooking
zones the indicator deactivates.
180 mm
1
145 mm
2
3
Function
Cooking zone
1
Power indicator
2
Control knobs
3
Residual heat
Warning! There is a risk of burns from
residual heat.
Timer
Count Down Timer
You can use this function to set how long the hob
operates.
First set the heat setting.
To activate the function: turn the knob for the timer as
far as possible. Then turn it to the correct time period
value.
When the time comes to an end, the
sound operates and the hob deactivates.
Minute Minder
You can use the timer as a Minute Minder.
First set the heat setting to off position.
To activate the function: turn the knob for the timer as
far as possible. Then turn it to the correct time period
value.
To operate the hob manually turn the
knob for the timer to
.
13
Publicité
