Publicité
• After batteries are fully
charged and the charger
remains powered, it will
go into trickle charging.
Batteries can be stored in
the charging slots without
discharging.
• Safety by separate safety
timer and temperature
sensors.
• Non-rechargeable and
damaged batteries
detection.
• Charging status with 2
color LED indicator for
each slot.
• Store up to 8 HR6/AA
batteries and 4 HR03/AAA
additional batteries in the
storage compartment
inside the lid. HR6/AA
storage slots can also fit
HR03/AAA batteries.
• Possible to wall mount the
charger by the two key
holes located on the back.
Operating instructions
• Connect the provided
power cord with charger
and plug it into the power
outlet.
• Insert the batteries
into the charging slots
according to the polarity
indications (+/-)
• The LED indicator status:
White LED pulsing on:
Charging in progress
White LED steady on:
Charging complete
Red LED flashing: Error
- inserted batteries
are non-rechargeable,
damaged, have too high
or too low temperature
or the batteries are not
connected in accordance
with polarity indications.
• The charger must be
connected to power outlet
for the trickle charging to
work during storage.
• Disconnect the charger
from the power outlet
before cleaning or when it
is not used.
Good to know
• Brand new batteries need
2 to 3 times of charging
and usage cycles to
optimize the battery
performance.
5
Publicité
