Publicité
INSTALLATION
Door Reversibility
Before reversing the door, please be prepared below tools and material:
straight screwdriver, cross screwdriver, spanner and the components
included in the poly bag:
Left hinger cover×1
Left hinger×1
1. Close upper door, take out the screw from the top covers by cross
screwdriver. Take off hinge cover, disconnect the terminal, then unscrew
top hinge and take off upper door.
2. Please upwarp and take off plastic cover and wire sleeve by straight
screwdriver. Please be careful of the wire inside. Then move wire with
connector to another side and install wire sleeve to another side and fix
cover back.
3. Unscrew from the middle hinge by cross screwdriver,
then take off the lower door.
Left middle stopper×2
10
Left middle stopper metal block×2
EN
Publicité
