Publicité
4.
When you hear a click, the battery is installed.
5.
Close the battery door.
Note: The motor will start only after inserting the
safety key.
3.9
START THE PRODUCT
1.
Make sure safety key is inserted into the key slot.
2.
Press and hold the power button. Then, grasp
either of the blade activation levers towards the
handle bar to engage the blades.
Note: Complete the two consecutive actions within
5 seconds.
2
3.
Once the product has started, you can release
the power button.
3.10
ACTIVATE TURBO BOOST (TEMPORARILY
INCREASED CUTTING SPEED)
1.
Press the turbo button to increase the speed up
to 3000 RPM.
2.
Release the turbo button to operate at the default
cutting speed.
Note: When using the turbo boost button,
the battery will drain faster. Therefore, it is
recommended to use the turbo boost button only
when necessary.
1
TURBO
DUAL DRAW
TURBO
DUAL DRAW
TURBO
English
3.11
OPERATE THE SELF-PROPELLED DRIVE
SYSTEM
3.11.1
SELF-PROPELLED DRIVING SYSTEM
1.
While holding the blade activation lever, pull
either of the drive levers towards the handlebar
to engage the self-propelled driving system.
2.
Release either set of start handle and drive lever
from the same side.
3.
Adjust the speed control with your free hand.
Note: To sustain self-propelled mowing,
continually hold the blade activation lever and
drive lever from either the left or right side at
the same time.
• To increase the speed, slide the speed control
switch towards the Rabbit Symbol.
• To decrease the speed, pull the speed control
switch towards the Turtle Symbol.
4.
Release the drive lever to disengage the self-
propelled driving system.
3.11.2
OPERATE WITHOUT MOWING
To engage the self-propelled driving system while
the mower is not running:
• Press and hold the power button, then pull either of
the drive levers towards the handlebar.
Note: Complete the two consecutive actions within
5 seconds.
3.12
LED HEADLIGHTS
1.
Press the LED button to turn on the LED
headlights.
11
1
TURBO
DUAL DRAW
2
TURBO
DUAL DRAW
EN
Publicité
