Publicité
Automatic Standby
The helmet will automatically enter sleep mode (power-saving) if it remains still without shaking for a while after
being turned on. The tail light will turn off to indicate successful activation of the sleep mode.
Automatic Wake Up
Connect to the"LIVALL Riding"app and enable the "Auto Power On" function. Gently shake the helmet a few times
to automatically wake up the helmet. The tail light will light up to indicate a successful wake-up.
Adaptive Warning Lights (default on, can be turned off through the APP)
The helmet has a built-in light sensor. When the lighting is good, only the middle taillight will flash, and the other
lights will automatically turn off.
In the dark or dim environment, the entire row of taillights will automatically turn on and flash according to the
previously set lighting mode.
Lighting Mode
Users can switch between different flashing modes of the taillight by short-pressing the power button at the back of
the helemt or by connecting to the APP.
Brake Warning Light
When the helmet detects a significant deceleration, the taillight will light up for a few seconds to warn the
vehicles behind.
Note: When the helmet shakes too heavy, the built-in sensor may also detect obvious deceleration and trigger the
warning light to stay on. This is normal.
6 6
Publicité
