Publicité
IV. Operating Instructions
Power on
Press and hold the power button
for 2 seconds, the helmet will prompt
"power on" and the tail light will turn on,
indicating that the helmet is turned on
Hold for 2 seconds
normally.
Note: If the helmet cannot be activated successfully, please charge it and try again.
Power off
Press and hold the power button until
all the LED tail light turns off.
Power button
Battery Status
The remaining battery level of the helmet is indicated by the number of light beads in the middle of the tail light
when the helmet is powered on. A fully charged helmet will have all the light beads illuminated.
3 3
Publicité
