Publicité
V. Precautions
1. The helmet contains electronic parts inside which are splash-proof. It is advised not to ride in rainy evironments
for extended periods of time.
2. After exposure to rainfall, water droplets may accumulate inside the tail warning light cover. It is recommended to
place the helmet in a ventilated environment for 1-2 days to allow the water droplets to dissipate automatically.
3. The helmet contains a battery which can be affected by temperature changes. When used in low-temperature or
sub-zero environments, the product's endurance time may be reduced to varying degrees.
4. In the event of electronic function failure or abnormality, it is recommended to charge the helmet for 3 hours
before attempting to use it again.
5.
The helmet is equipped with an impact detection device. Please connect the helmet to the "LIVALL Riding" App
to enable the function. In the event of a serious impact, the helmet will send an SOS message to the emergency
contact set in the App.
6. Do not use metal or hard tools to clean the golden contacts of the charging interface, such as blades, forceps, etc.
If cleaning is required, use a cotton swab and clean water or alcohol to wipe it.
7. The built-in battery of the product is strictly prohibited from disassembly, squeezing, heating, or burning. It is
strictly prohibited to pierce or pry the battery with sharp objects or screwdrivers, which may cause the battery to
catch fire or burn.
8. Please do not place the helmet with sharp objects to avoid damage to the helmet.
Note:
1.The product is a non-professional rescue device and may fail to send or receive SOS information due to network
abnormalities or other problems.
2. To maintain the battery life, it is recommended to fully charge the helmet before storing it for a long time (half a
year to a year). When charging, ensure that the charging port is clean and dry.
15
15
Publicité
