Publicité
Connect to the Remote Controller BR60 (if included)
1. First-time connecting to BR60
within
30cm
Turn on the BR60 and place it within 30cm of the
helmet for automatic connection
2. Connecting to a new BR60 (When the original BR60 is lost or damaged)
Turn on the new BR60 and place it near the helmet.
The warning light on the helmet will flash three
times per second to indicate that the new BR60 is
ready to be connected to the helmet.
When the connection is successful, the helmet
will emit a confirmation sound.
Press the power button on the helmet within
10s to confirm the connection to the new BR60.
4 4
Publicité
