Publicité
Method 2: Pairing multiple helmets through helmet buttons
1. Initiate an intercom team (Helmet A):
a) After turning on Helmet A, press and hold the power button of the helmet and at the same time press the LED
light on the side touch panel of the helmet. The LED light on the side touch panel will start flashing intermittently,
and there will be a soft voice prompt indicating that Helmet A has entered pairing mode.
b) Press and hold the LED light on the side touch panel of Helmet A again for about 4 seconds. The LED light on
the side touch panel will start flashing rapidly, and there will be a soft voice prompt indicating that Helmet A has
entered search mode and is automatically searching for nearby helmets.
2. Join the intercom team (Helmet B、C、D...):
a) After turning on Helmet B, press and hold the power button of the helmet and at the same time press the LED
light on the side touch panel of the helmet. The LED light on the side touch panel will start flashing intermittently,
and there will be a soft voice prompt indicating that Helmet B has entered pairing mode.
b) If you need to pair other team member helmets (Helmet C, D ...), repeat step 2 for other members.
3. Successful Pairing
11
11
Publicité
