Publicité
Setpoint Max:
Limits the maximum temperature at which you can
set the heating.
Setpoint Min:
Limits the minimum temperature at which you can
set the heating.
Frost protection:
Activate freeze protection. When the protection is
active, the heating is automatically activated below 5º.
Factory reset:
Clears all settings and resets the thermostat, retur-
ning it to factory defaults.
WEEKLY SCHEDULER
Allows you to establish weekly programming, as long as the ther-
mostat is in programmed mode, it will follow this programming.
The days of the week are shown at the top, the system allows four
sections to be programmed.
By clicking on each section you can set the start time and the desi-
red temperature for the section.
You can copy the schedule from one day to the other days of the
week by holding down the day you want to copy for three seconds.
When the thermostat is in programmed mode, you can manually
change the desired temperature, but at the beginning of the next
section it will continue with the programming.
47
Publicité
