Publicité
Installation guide
There are two ways to install the thermostat, in either of them, one
of the two devices (thermostat or central) must be connected to
the boiler using the cables that allow its control.
If you have pre-installation for a thermostat in the living room,
If you have pre-installation for a thermostat in the living room,
you can install the thermostat there (wall installation), if, on the
you can install the thermostat there (wall installation), if, on the
other hand, you do not have pre-installation, or you prefer to
other hand, you do not have pre-installation, or you prefer to
have the wireless thermostat, follow the instructions for (wireless
have the wireless thermostat, follow the instructions for (wireless
installation).
installation).
Wall installation
Wall installation
Wall installation requires pre-installation of a thermostat in the
room, the thermostat will be fixed to the wall. Optionally, the
control panel will give you access to the internet, to be able to
connect it to the application. In this case, the control panel only
needs to be powered, it is not necessary to connect it to the boiler.
First attach the thermostat bracket to the wall. In this, there is a
terminal block with three positions, COM, NC and NO.
As a general rule, the pre-installation will only have two cables,
one of them is connected to the COM terminal, the other will be
connected to the NO terminal, it does not matter which terminal
you connect each one to, if once the installation is finished, you
check that the boiler works at The reverse, (it turns on when the
temperature drops and turns off when it rises), changes the cable
connected to the NO terminal to the NC terminal.
If you do not have Wi-Fi in your home, or do not want to connect
33
Publicité
