Publicité
TIME ADJUSTMENT
Setting the clock enables measurements to be accurately recorded.
The monitor can record the date and time of measurement as well as the
measurement results. Be sure to set the clock after inserting the batteries.
1
2
3
* You can fast-forward the numbers in display by pressing
4
5
6
* Press the "
00̲CHU304̲All.indb Eng-8
00̲CHU304̲All.indb Eng-8
When you install the batteries for the first time, the
monitor will display time and date by turns.
Press and hold both the "
and the "
MEMORY" switch for approximately
two seconds, a beep is heard and the "month"
indicator blinks at first.
Press the "
MEMORY" switch to adjust the "month".
Press the "
MEMORY" switch to increase the number
by one. Press the "
START/STOP" switch to confirm the
setting. The "month" is set and the "day" indicator blinks.
and holding the
MEMORY switch.
Press the "
MEMORY" switch to adjust the "day".
Press the "
MEMORY" switch to increase the number
by one. Press the "
START/STOP" switch to confirm
the setting. The "day" is set and the "hour" indicator blinks.
Press the "
MEMORY" switch to adjust the
"hour". Press the "
number by one. Press the "
confirm the setting. The "hour" is set and the "minutes"
indicator blinks.
Press the "
MEMORY" switch to adjust the
"minutes". Press the "
the number by one. Press the "
confirm the setting.
START/STOP" with the time signal on the
radio, etc. to complete clock adjustment.
START/STOP" switch
MEMORY" switch to increase the
START/STOP" switch to
MEMORY" switch to increase
START/STOP" switch to
- Eng 8 -
2015/01/15 14:53:21
2015/01/15 14:53:21
Publicité
