Télécharger Imprimer la page

Hkoenig age8 Manuel D'instructions page 6

Publicité

increase the greenhouse effect. The use of this coolant has,
however, led to a slight increase in the noise level of the
appliance. You might be able to hear the coolant flowing
around the system.
This is unavoidable, and does not have any adverse effect on
the performance of the appliance. Care must be taken during
the transportation and setting up the appliance that no parts
of the cooling system are damaged. Leaking coolant can
damage the eyes.
A wine cooler is the most practical space for storing wines. Its role is to balance the temperature and
humidity inside so that your wine does not lose its taste and its aromas.
Due to these heavy operations, noises can be heard. Most of the time, this is normal noise.
Before calling technical service for assistance, please read these few lines.
These sounds are completely normal: buzzing, roaring, clicking, cracking ...
When the cooler has just stopped working, you may hear a buzzing, roaring, clicking or squealing noise.
When the operation stabilizes, the sounds subside.
For direct cooling, some kind of irregular cracking, hissing, bubbling, crackling can often be heard when
the compressor is running for a while or has just stopped. This sound is caused by the relief of stress due to
expansion and contraction when temperature changes, and will not be affected by normal application of
the product.
The compressor consists of an electric motor and a compression device. Due to the heat produced during
the compression of the refrigerant, it is possible especially in summer when the ambient temperature is
higher that heat is emitted by the cooler. All of these phenomena are normal.
To reduce some noises:
First, make sure your cooler is on a level surface.
Location is important, do not lean the cooler against the wall.
The bottles must be correctly loaded to avoid parasitic vibrations.
The noise may come from the circulation fan, check that nothing is interfering with its operation.
INSTALLATION INSTRUCTIONS
Before putting your appliance into service
Remove all inner and outer packaging components.
This appliance is designed to be free standing.

Publicité

loading