Page 2
0,5 < S < 2,5 mm² Check the temperature range Non maintained on the 1st page for M and NM Maintained versions. Date installation Installation date /yyyy Installationsdatum T/ M/ FLEXITECH EXIT CEILING ATL ZNO2059800 A 06/2023 www.eaton.com Data installazione...
Page 3
DURATION TEST OCCURENCE CONFIGURATION Even Duration Test Day D Duration Test Day postponed by 7 days Disconnect the battery, wait for 10 seconds, and reconnect it if you decide to change configuration. FLEXITECH EXIT CEILING ATL ZNO2059800 A 06/2023 www.eaton.com...
Page 4
10 wks Battery Yellow 0,5 s. Constant Blinking DOUBLE-SIDE OR SINGLE-SIDE CONFIGURATION DOUBLE-SIDE SINGLE-SIDE LIGHTING LIGHTING Disconnect the battery, wait for 10 seconds, and reconnect it if you decide to change configuration. FLEXITECH EXIT CEILING ATL ZNO2059800 A 06/2023 www.eaton.com...
Page 8
Non maintained Maintained Maintained Duration test & Duration test Check the tempera- Before Battery luminous flux configu- occurence ture range on the 1st Installation date ration configuration maintained page for M and NM versions. Non maintenu Maintenu Durée des tests et Maintenu Avant Batterie...
Page 9
Disconnect the battery, Autotest LED Description wait for 10 seconds, - Charge / Lamp / - Green / Yellow and reconnect it if Double-side or Single-side configuration Battery - Constant / you decide to change - 1wk / 10wks Blinking configuration.
Page 10
Replaceable Magnet Test Not replaceable Hold the magnet Functional Test Battery pack, Order code against the product Duration Test Pictogram configuation If the battery duration is insufficient, replace the Reset luminaire to select light level battery. DIM level (in Mains mode). When the life time of light source is over, replace Green / Yellow the luminaire.