Publicité
* * * *
PIN LOCK
Enter PIN
code to LOCK
BLUETOOTH
OFF
ON
DISPLAY
Brightness
Screensaver
FIRMWARE
System:
Wireless:
FACTORY DEFAULT Restore factory settings: Select RESET and confirm.
RESET
(the illustrations in the unit menu may vary slightly depending on the software version)
MAILA APP
Download the MAILA app, which is available free of charge in the App Store, onto your tablet and install
it. Activate Bluetooth in the system settings of the active MAILA components. Also activate Bluetooth
in the system settings of your tablet and start the MAILA app. The MAILA components with activated
Bluetooth within range are now automatically displayed in the MAILA app after a short time.
FIRMWARE UPDATE
Check with the help of the MAILA app whether a new firmware is available for your device. Start the
update procedure via MAILA App. Make sure that there is a stable wireless connection between the
device and tablet and do not turn off the device or tablet before the update procedure is complete.
Aborting the update procedure may cause the device to malfunction. The MAILA app for iPadOS is
available free of charge in the App Store.
INDICATION-LED
The amplifier module has a white display LED on the front
behind the front grille. This can be activated to easily identify
the amplifier module with the help of the MAILA app. The MAILA
app for iPadOS is available free of charge in the App Store.
Protect the amplifier module from accidental and unauthorised
operation by activating the lock function.
Enter a 4-digit PIN and confirm the entry. Access can now only be
achieved after entering the PIN.
Reset PIN: Press and hold the encoder when switching on
(connect the unit to the mains) .
Bluetooth deactivated.
Bluetooth activated. Access to the system via tablet App
enabled.
Adjust the display brightness from 10 % to 100 %.
active
inactive
xxx
xxx.xxx
RESET
Deactivation of the display illumination after
approx. 1 minute without input via rotary-push
encoder.
Display lighting permanently on
Display of the system firmware.
Display of the firmware of the wireless module.
17
Publicité
