Pelgrim GVW765ONY Notice D'utilisation page 37

Disassembling door panel of 60 cm
dishwasher
Remove the screws on the side of the door
panel with the plastic tool provided. Pull
the pins in the left and right side of the
panel outwards (C).
Installing door panel of 45 cm dishwasher
(see fig. 9a/9b)
B
C C
Place the template on the inside of the door
panel.
The top of the template is the top of the
door panel.
The top of the template must be placed
level with the top of the door panel.
Centre the template on the right and left
sides with the aid of the measuring marks.
Transfer the markings of the drill holes on
the template onto the door.
Turn the template to the left of the panel.
The side of the template is the side of the
door panel. Slide the template so that the
reference point coincides with the hole
marked on the top of the door.
Mark the bottom hole in the template on
the panel.
Turn the template to the right of the panel.
The side of the template is the side of the
fig. 9a
door panel. Slide the template so that the
reference point coincides with the hole
marked on the top of the door.
Mark the bottom hole in the template on
the panel.
If the door panel is made of solid wood,
predrill the holes with a 2 mm drill (12 mm
deep).
Be careful with any milled edges on the
front of the panel.
fig. 9b